The Prestashop Twitter Post Feed is an addon which provides a feature to advertise your Twitter Page on your store by adding Twitter window (Notification Bar). Users can click on this bar and see the summary of added Twitter Page. Users can also like and comment on the same. This advertisement helps to share information/updates about the store and can increase the conversion.
2.0 Steps for Installation
1. Copy twitter post feed module folder under your root_directory/modules/of your store via FTP or use Prestashop interface to upload the plugin.
2. After copying, the Prestashop module will be listed on module listing page in the admin panel as given in the below screen.
3. If Prestashop twitter post module is not displaying on your module listing page, search it by filtering module with following details:
Filter by: Installed & Not Installed/Enabled & Disabled
Note:
1. When you will click on install button, a pop-up box will appear which will display warning messages. You can ignore these messages and move ahead. There will be no negative impact of this warning message on your store.
2. After installing Prestashop feed module, a “configure” button will be in front of this plugin on the module listing page as shown in the screen below:
3.0 Configuration Settings
To access this module, Click on configure button of twitter post feed module. On clicking, module interface will be open and following screen will be displayed as given below:
This User Manual provides you the guidelines of this Prestashop addon. This module has 2 interfaces –
The admin interface
The front end interface
3.1 Admin Interface
Admin can setup or configure this module through Admin Panel of store by following steps given below –
Go to Store Admin -> Modules and Services
Find “Twitter Post Feed” and click “configure” button given corresponding to the module.
General Settings tab will be displayed.
Enable the “Enable/Disable” Button.
Click on Save button.
3.1.1 General Settings
Enable/Disable: To enable the twitter feed plugin, switch the enable button from OFF to ON. The default value will be “OFF”.
Select the Position: This is the option to choose which column your twitter post feed will display on your front page. The default value will be “Left Column”.
Allowed pages: This is a drop-down option. Here, you can choose the pages on which you want to display the Twitter feed.
Custom CSS: Admin can add custom CSS codes in this section to override the CSS of the Prestashop twitter feed module.
3.1.2 Window Settings
This tab basically contains look and feel of maintenance page. These settings are for our user interface on maintenance page.
Data Widget ID: This is the widget ID of your twitter page. You need a widget ID to show your tweets from Twitter on your website. To know your twitter widget ID please see here.
Widget Theme: You can also have an option to show your tweet window in dark or light theme. The default value of this field will be“light”.
Widget Height: This is the height of twitter window. Default data will be white “15px”. This only works when tweet limit is null.
Set Tweet Limit: You can also limit the number of tweets on the window using this options. The default data will be“null”.
Hide Widget Scrolling: This is the option to turn off scrolling in your tweet widget if it is annoying on your desired page. The default value will be ‘Yes’.
Remove Widget Border: This is the option to remove the border from your tweet twitter feed addon if it is annoying on your desired page. The default value will be ‘Yes’.
Make Transparent Widget: You can also make your Prestashop module transparent on your desired page using this option. The default data will be “No”.
Remove Widget Footer: You can remove the widget footer if it is annoying on your desired page. The default data will be “Yes”.
Recommendation: Do not set tweet limit, some page may be distorted.
3.1.2.1 How to get Widget ID?
You can get the Widget ID by following steps given below –
Search your Twitter page and click on “Create Widget”.
Copy the Numeric Content from the URL as shown below and paste it at field “Widget ID”.
3.2 Front End Interface
3.2.1 Twitter Icon on right column
3.2.2 After clicking on icon default Settings Interface
3.2.3 Dark theme with tweet footer
3.2.5 Without Tweet Footer
3.2.5 Light theme with tweet footer
3.2.6 Dark theme with transparent widgetFrom all of the above images, you can easily make your homepage more social for your customers. They can tweet easily and read all the tweets by you.
Prestashop Facebook Post Feed is an addon which provides a feature to advertise your Facebook Page on your store by adding Facebook window (Notification bar) in the left or right. Users can click on this bar and see the summary of added Facebook Page. Users can also like and comment on the same. This advertisement helps to share information/updates about the store and can increase the conversions.
1.1 Features of the Prestashop Facebook feed addon
The feature-packed module includes:
The Prestashop addon is fully customizable and can be activated or deactivated from the back end.
The Facebook feed addon by Knowband allows you to show the Facebook posts of your page on their website along with the Like button.
Without having any knowledge about coding, the admin can install and configure the module effortlessly.
The Prestashop Facebook Post Feed plugin is multi-lingual and multi-currency taking your business to a wider reach.
The addon lets your followers your posts, like them and follow your news as well as notification without actually going on FB. Hence, it generates more traffic and sales in the store.
The admin can change the background color and the color of the notification bar in accordance with the theme of the store.
The Facebook Post Feed is an easy way to promote your business by sharing the news, posts, and other notifications while the customers find an easy way to like them by hitting the ‘Like’ button.
The store admin can preview the changes made in the back end and see how they’ll look on the front end.
2.0 Steps For Installation
After purchasing Prestashop facebook wall feed module from Knowband, you will get the following files as listed below:
1. Compressed File in ZIP format (contains source code of the module)
2. User Manual
Follow the following steps to install the Prestashop addon:
Unzip the compressed file. It would contain files and folders as shown below –
Copy all the files and folders of the unzipped folder into your store “modules” directory on the path – Root Directory/modules/.
Now, the Prestashop facebook feed module is ready to be installed in your store and you can find that in Store Admin -> Modules and Services. It would be shown as below –
Click on “Install” button to install the module. It would show a pop-up for your confirmation. Click on “Proceed with the installation” option. This step will install the module and show notification – “Module(s) installed successfully”.
3.0 How to configure module?
Admin can setup or configure Prestashop Facebook Post Feed module through Admin Panel of store by following steps given below –
Go to Store Admin -> Modules and Services
Find “Facebook Post Feed” and click “configure” button given corresponding to the module.
It would open a new page as shown below –
There are following sections available to configure this Facebook feed module –
General Settings
Window Settings
Each section is explained below –
3.1 General Settings
This section allows admin to enable/disable Prestashop Facebook Post Feed module with some other general settings like column selection, background color, and the details on the button (the like icon, share icon and post icon).
You have to follow steps given below to configure General Settings –
Go to the Module and Services -> Module and Services
It would list all the modules of the store. Find ‘Facebook Post Feed’ in modules list.
Now click on ‘Configure’ button given corresponding to the ‘Facebook Post Feed’ module.
It would redirect the Store Owner or Admin to a new page as shown below –
Update the values of given fields corresponding to ‘General Settings’ as per need.
Now click on ‘Save’ and it would validate and save the provided values.
That’s it.
This section contains following options –
Enable/Disable: Initially, this will be “OFF”. Admin can enable/disable add-on functionality by turning this “ON/OFF”.
Select the column: This is a drop down box in which the admin can select that the page button which he has selected should appear in the left column or the right column of the store. 3.Details on the button: Here, admin can select icons to display on Facebook Button. Choices can be Like Icon, Share Icon and Post Icon. 4.Background Color: This is a color picker in which admin can decide what should be background color of the button appearing on the screen.
3.2 Window Settings
This section allows admin to update the settings for the Facebook window being shown on the storefront.
You have to follow steps given below to configure Window Settings –
Go to the Module and Services -> Module and Services
It would list all the modules of the store. Find ‘Facebook Post Feed’ in modules list.
Now click on ‘Configure’ button given corresponding to the ‘Facebook Post Feed’ module.
It would redirect Store Owner or Admin to a new page. Click on “Window Settings” and it would open a new section as shown below –
Update the values of given fields corresponding to ‘Window Settings’ as per need.
Now click on ‘Save’ and it would validate and save the provided values.
That’s it.
This section contains following options –
Enter the page link: Here, the admin has to enter the page link to show posts of that page on the window added by the module on the storefront. By default, Facebook Page will be shown.
Facebook window UI: Here, admin can decide what should be the UI of the window which is appearing on the screen. This option allows admin to include the following options:
a) Adapt to plugin container width
b) Show friends faces
c) Use small header
d) Show page posts
e) Use cover photo
4.Store Front Appearance
After enabling Prestashop facebook wall feed, a button starts to appear on every page of the shop and the appearance of the button is according to the settings done in the back end of the module.
The module at the front-end appears as follows –
Recommendations
Refresh home page of your store every time you enable/disable plugin. If the Prestashop Facebook Post Feed plugin is not working after installation then please check permissions on modules folder. The folder should be writable. Please make the folder permission to 755.
The Prestashop Gift The Product addon by Knowband gives the benefits to both, the customer and the consumer. This module will absolutely help the merchant to increase the sales of the store and on the other hand, it will surely get the customers benefited by offering them products for free. This Prestashop extension will be the best option for a merchant to get the customers to his stores.
Objectives:
With the help of this Prestashop free gift addon by Knowband, the website owners can get the following things:
Increase in the customer’s engagement.
Reduction of the risk of cart abandonment.
Increase in the sale of the store.
Customer will be rewarded with freebies.
Prestashop gift product encourages the customer to buy things more often.
This Prestashop freebie addon will be one of the best options for the merchant to get the customers to his store.
Installation:
To install this Prestashop freebie addon, please follow the following steps:
1. Add addon folder under modules folder of your system.
2. After adding this addon folder, system will list the addon on module page under front office feature category as given below:
In admin module, you’ll see following options to configure this Prestashop promotion gift module:
1. General Settings
2. Price Rules
Each section is described in details below:
General Settings:
This section of Prestashop gift the product addon will have the following options to configure this Prestashop gift module:
1. Enable/Disable: This option has a toggle button with two specific values, i.e. YES and NO. This Prestashop reward gift addon will only work if this is set to YES. If you select NO, then none of the features will work. By default, this option is set to NO. You’ll need to select YES.
2. Enable/Disable Rule Wise Gift Products: This field is provided so that admin can set the restriction on the number of gift products displayed on the front for selection.
3. Maximum Gift Products For Each Rule: If this field is enabled then customer can chose more than 1 gift product according to the specified rules.
4. Custom CSS and JS: These fields have been given to the admin so that he can change the look and feel of the front end of the Prestashop free gift addon.
5. Enable/Disable the module compatibility with Knowband Supercheckout: This option has a toggle button with two specific values, i.e. YES and NO. This Prestashop reward gift addon will work with Knowband One Page checkout if this is set to YES. If you select NO, then it will not work with One page checkout module.
Price Rules:
In this section of Prestashop gift module, the admin will have to make the following price rules that will decide the gift product.
1. Price Rule Name: Here, you need to enter the name of the price rule that you want to be saved.
2. Minimum Cart Amount: Now, the admin will have to set the minimum cart amount to decide the Prestashop gift product.
3. Minimum Gift Product Amount: In this field of Prestashop freebie addon by Knowband, the admin will have to enter the minimum product amount of the gift products.
4. Maximum Gift Product Amount: Lastly, the admin will have to enter the maximum product amount of the gift products.
The Gift products which will be in between the entered price range will be shown to the customer in the front end.
This is how the Price Rule section looks like:
On clicking the edit button, a form will appear Where you’ll have to make the desired changes. This is how the Price Rule form looks like:
Front End Module
Once the Knowband Prestashop product purchase reward addon is enabled, a block will appear just below the cart summary on the front end saying “CONGRATULATIONS!! YOU ARE ELIGIBLE TO GET ONE OF THESE GIFTS”. This block will include the gift products according to the price rules which have been decided by the admin in the back-end of Prestashop gift the product addon.
We hope that we have covered all the concerns regarding the installation and product guide of this Prestashop Discount and Promotion Addon.
Watch Video Tutorial of Prestashop free gift addon:
Tutorial: Watch the YouTube Video Guide
To help you set up and use the Knowband PrestaShop Gift The Product Module, we have prepared a comprehensive YouTube tutorial video. This video demonstrates step-by-step how to install, configure, and manage gift rules to enhance your store’s promotional campaigns.
In This Tutorial Video, You Will Learn:
How to install and activate the Gift The Product module in your PrestaShop store
How to create gift rules based on cart value, product purchase, categories, or customer groups
How to display gifts on product pages and cart pages
How to manage multiple gift offers and set priority levels
Watch the tutorial here:
If you are a store owner and looking for an appealing option that can attract the customers to the store, then Prestashop freebie addon is the best solution for offering free gift products to your customers on completing the final checkout of the product.
Gifting can make anybody happy and if you don’t believe then you can simply buy Prestashop gift the product addon and experience better results for your Prestashop store.
For any questions, assistance, or custom modifications related to the Gift The Product module, contact our support team: support@knowband.com
This addon is basically an Prestashop Marketplace Addon. The Marketplace admin can create seller badges based on the various parameter to be satisfied by a seller to obtain one. Seller badges are displayed to the customers once they visit the seller profile page or product page of a particular seller. Admin can create Seller Badges for his sellers like Best Seller, Best Customer Support, Best New Seller etc. Parameters to obtain one can be set from the back-end panel of admin.
So, keeping this in mind, this ad-don will provide features to customer through which customer can see a seller badge and interprete the kind of seller on the marketplace.
This interface will have two fields for the admin in the back end. Both of the fields are listed below-:
List of seller badges
The list of seller badges already applied can be found in the Configuration settings in inside Modules and Services >> Modules and Services on the admin panel.
Add new Seller Badge:
Admin can add a New Seller Badge on his marketplace site by navigating to Modules and Services >> Modules and Services >> Knowband Marketplace Seller Badge >> Add New (Plus Icon)
1. Badge Name: Give a name to your seller badge. This name is for admins personal reference, it will not be displayed to any one else.
2. Enable: Select the status as Yes if you want the badge to be active on the marketplace.
3. Badge Image: Upload an image for the badge that will be visible to the customers on the sellers profile page or the product page of the particular seller.
4. Min. Average Rating: Provide the Rating Parameter to achieve the particular badge. For example, you can decide seller has to get at least 3 stars to obtain this badge.
5. Sale Performance Type: Provide a parameter that will be used to decide if a seller is eligible for the particular badge. You can select from two types of parameters, Sale by Order Total or Sale by Product Sold.
If you select Sale by Order total, then the eligibility of seller will be checked on the basis of total orders processed by him on his store.
If you select the Sale by Product Sold, then the eligibility will be tested on the basis of the total products sold by a seller on his store.
6. Min. Monthly Sale Performance Value: Enter the minimum Monthly sale required for a seller to be eligible for the particular badge.
7. Save : Save once your settings are done.
Customer Interface
Here the customers can see the badges acquired by the sellers on two types of interfaces.
Product page Interface
1. The Product Page of the particular seller as shown in the screen shot below:
Seller Profile interface
2. The seller profile Page on the front end of the store.
Configuration Page
This is a page where seller can enable/disable this feature from customers. After disabling this, customer cannot see the Seller Badges on the marketplace. Also, Admin can configure the badges from the same interface.
This online shoppers is always in the search of exciting offers, reward points and deals. This is one of the ways to encourage them to purchase the products. If your eCommerce store is unable to trigger the purchase decision of the customers, then, it is certainly going to hurt your business in the long run. Knowband’s Prestashop Reward Points Addon will prove to be a great bonus to the merchants store as it can motivate the customer purchase more and more products. The customers can win reward points in return of the purchases.
Knowband’s Prestashop Loyalty Points Module enables the customers to win reward points after he/she has placed any order. The reward points allows the customers to shop even more at discounted prices. Once the customer has won enough reward points, they can get discount in return of the points.
All the settings regarding the Prestashop reward points addon and the discount values will be given to the merchant in the backed of the extension. Now the Prestashop Reward Points addon is compliant with GDPR. The online mercant can activate the settings to delete the customer details on GDPR data deletion request. The admin can also display a privacy policy consent on the website and also set it’s text and URL in different languages.
1.1 Benefit of Merchant Prestashop Reward Points Addon
Knowband’s Prestashop Loyalty Points Module enables the admin to give the loyalty points to customer when they place their order.
This Prestashop Reward Points Addon allows the admin can set rules for guest as well as registered customer.
The admin can set the N number of discount and reward points rules according to the need.
The Prestashop Reward Points extension allows the admin to view the list of customers used rewards points and remaining rewards points.
This Prestashop Addon helps the admin to engage more the customer to the website.
This Prestashop reward points addon motivate the customer to place another order to use reward points.
It helps the admin to reward the loyal customer by giving them loyality points.
With help of this Prestashop reward points addon, the admin can increase revenue and conversion of website.
Presatashop Loyality Points Extension helps you to improve your popularity by letting the customers share the reward points with others.
The online merchant can also set the GDPR related settings from the admin interface of this Prestashop Reward Points Module.
The Prestashop product purchase reward extension allows the admin to set the privacy policy consent, it’s text and links in different languages.
The e-merchant can also activate the settings for deleting the customer data on GDPR data deletion request.
1.2 Benefit of Customer Prestashop Reward Points Addon
Customer can use the reward points to they make purchase in the future.
This Prestashop Loyalty Points Module allows the customer to share the loyalty points with their friends.
Customer can view the reward points his/her profile.
2. Installation
To install this Prestashop Purcharse points addon, please follow the following steps:
Add addon folder under modules folder of your system.
After adding this Prestashop addon folder, system will list the addon on module page under “front office feature”category as given below:
In admin module, there will be following options to configure this Prestashop Reward Points addon. The Prestashop Addon includes 7 tabs and they are as follows
1. General Settings.
2. Guest Reward Points Settings.
3. Guest Discount Settings.
4. Registered Customer Reward Points Settings.
5. Registered Customer Discount Settings.
6. Email Settings.
7. Statistics.
Each section is described in details below.
3.1 General Settings
This section will be having following options to configure the Prestashop loyalty points addon.
1. Enable/Disable: This option will be having a toggle button with two specific values ON and OFF. This module will only work if this is set to ON. If this is set to OFF then none of the feature will be working and not even impacting any other section of website. By default, this option will be OFF.
2. Delete customer data on Delete request for GDPR: The online store admin can enable the settings to delete the customer details on GDPR deletion request.
3. Enable/disable privacy policy: The online merchant can activate or deactivate the settings for showing privacy policy consent check-box.
4. Privacy policy Text: The online merchant can set the privacy policy text from the admin interface in different languages.
5. Privacy policy URL: The online store owner can set the privacy policy URL from the admin interface of this reward point module.
6. Custom CSS and JS: These fields have been provided to let the admin change the look and feel of the front end of the module. So if he feels to add certain CSS or JS in the front the he can enter those into these field respectively.
3.2 Guest Reward Points Settings
In this tab the merchant will enter the rules according to which a guest customer will win the reward points. When the merchant will click on the add new button available in the tab then a pop up will appear which will have the following fields in it-
1. Minimum Order : Here the admin will enter the minimum amount of the order which has to be their to give the customer certain reward points.
2. Reward Points : Here the admin has to enter the number of reward points which a customer will be awarded after placing the order if he satisfies the above two conditions.
Admin can even edit or delete the created rule by clicking on the action buttons which will be available in the same row where the rule will be listed.
Form which will appear after clicking on add new button-
3.3 Guest Discount Settings
The settings done in this tab will only work for guest customers.In this tab the merchant will have to enter the discount and reward points settings i.e after how many reward points the customer will get discount. Fields which will be available in these tab are-
1. Minimum Reward Points : In this field he admin will enter the minimum amount of reward points which a customer should have to satisfy this rule.
2. Discount Type : In this field the admin will select the type of discount which will be given to customer if he satisfies the above conditions. It may be percentage or fixed discount.
3. Discount Value : In this field the admin has to enter the discount value which the customer will get after applying the minimum reward points.
4. Discount Validity : In this field the admin will enter the discount validity of the discount which will be generated
Form which will appear after clicking on add new button.
3.4 Registered Customer Reward Settings
This tab will be same as the guest reward settings tab. But the only difference in this tab is that it will work only for the customers who are registered.
3.5 Registered Customer Discount Settings
This tab will be same as the settings for the guest discount settings tab. But the only difference in this tab is that it will work only for the customers who are registered.
3.6 Email Settings
When the customer will share its reward points with other customer from the front end then the customer to whom the reward points are shared will get a mail from the store end to let them know about the reward points added to their account.
1. Select Language: Here the admin will select the email language using which he will send the email to the customers who have won the jackpot
2. Email Subject: Here the admin can enter the email subject. What ever subject the admin will enter in this email field will be used as the subject of the email sent to the customer whenever they will win any jackpot in the front.
3. Email Content: Here the admin can enter the email content which will be sent to the customers who will win the jackpot in the front..
3.7 Statistics
In this tab admin can view the stats of the reward points which are generated till date. The admin may also view the total number of reward points generated and used and may also filter the reward points according to the customer those who have used this module to get reward points.
4. Front End Module
When the module is enabled from the admin panel then it will first appear in the account of the customers. A link stating My Reward Points starts appearing in the account of the customers, On clicking the link the customer will be directed to the list of reward points which they have won by placing different orders. If the order of the particular reward points is delivered then those reward point will be available for use to the customer.
The Prestashop Loyalty Points Addone will also appear above the cart when the customer is about to do the payment for the order. The customer can view his/her reward points and add those reward points to the cart.
You can try Prestashop reward points addon for on your Prestashop website. KnowBand’s Prestashop Loyalty Points extension helps you reward the loyal customer to your store & increase the revenue of website.
The Prestashop Mobile Order Lookup Addon by Knowband is designed for the Prestashop eCommerce businesses and enables the customer to view order info or order status without logging into the account. The Prestashop order details module also allows the store owner to keep a track of the orders and view the customer status.
Merchant Benefits of the Prestashop Mobile Order Lookup Addon:
The Prestashop mobile order lookup module by Knowband lets the customers track their order status without logging into the account in the store.
Use of Prestashop order details addon, the store merchant can track the customer details from the back-office of the module.
Knowband’s Prestashop Order Lookup addon gives store admin the option to monitor the number of customers who viewed their order status.
The Online store merchant can customize the look and feel of the Order Lookup button text and color from the back-end of the Prestashop shipping details module.
Prestashop mobile order lookup module by Knowband allows the admin to change or add the new test which are shown above order lookup result.
This Prestashop order lookup module supports the multiple themes.
Prestashop order details addon by Knowband reduces the burden on manual support system through real-time tracking.
Knowband’s Prestashop mobile order lookup addon admin interface extremely easy to use.
2.0 Installation
The screenshot below shows the folder structure of the Order Lookup plugin folder.
Folder structure of the Order Lookup plugin folder.
Copy the whole folder named as order lookup into your modules folder of the root directory of your PrestaShop store through FTP.
You will be able to find the Prestashop order details addon ready to be installed in the Modules in your PrestaShop store as shown below.
Click on the Install link to install the Mobile order lookup Prestashop addon.
3.0 Admin Module
Here, the Prestashop store owner can change the various settings of this plugin according to the requirements which will be reflected on front-end as well as in the admin panel.
To install this plug-in, please follow the following steps:
Add all whole plugin folder to the modules folder into the root directory of the PrestaShop Store.
After adding the plug-in files, then the system will list the plug-in on the module page.
Click on install/uninstall according to the need.
3.0.1 Admin Interface
After installing Prestashop order details module into the store, it will provide the following interface:
General Settings
Lookup Statistics
Language Translator
Get Support
Each interface is explained below.
3.0.1.1 General Settings
On clicking the configure link on the module listing page (configure link will automatically appear once you install the plugin), the system will open general settings tabs by default as shown in the screen below:
Initially, the fields in the above form will be already filled with their default values.
Enable/Disable: Initially, this will be OFF. The Prestashop store Admin can enable/disable plug-in by turning ON/OFF this setting.
Text control: Here, the admin can control text which would be shown on Order Lookup page and on the result page. Admin can also set different text, text layout and text color for all the languages available in the system. The type of format and text set by the admin in these controls are visible at front-end for the corresponding language selected.
Color control: Here, the admin can control colors of the buttons which would be shown on Order Lookup page and on the result page.
3.0.1.2 Lookup History
In this tab, Prestashop order status plugin will show the statistics of Lookup page view in terms of number. Reports will be displayed in the form of graphs. With the help of these statistics, the admin will be able to know at which time, Order Lookup page opened most. The store owner can enter any range and the system will show the results accordingly. By default, the graph will show the stats for the current week. The lookup stats are shown as follows:
3.0.1.3 Language Translator
In this section, the admin can enter the text and can also change the texts that are displayed in the admin panel as well as front-end for the Mobile order lookup Prestashop addon. The interface for the language translator consists of two tabs through which the admin can enter the language texts for the admin panel and front-end. The admin can also download the language file generated. The language translator looks like the following:
3.0.1.4 Get Support
If the admin has found any issue regarding the Prestashop plugin and wants any type of support, then via this link, he/she can create a ticket for any query on our help desk support. On clicking this link, a new tab open with where the admin can generate the ticket for support.
4.0 Front End Module
At the front end, the customer will see a link on top menu which will redirect the customer to Order lookup form page.
When the customer will click on the link, a new page would open which will ask for Order reference and email id.
The link to the order lookup page will appear as follows:
When the customer clicks on the link, a new page would open which will ask Order reference and email id.
After entering correct details, the customer will be shown the corresponding Order data.
Recommendations :
Refresh home page of your store every time you enable/disable plugin. If the Prestashop extension is not working after installation then please check permissions on modules folder. The folder should be writable. Please make the folder permission to 755.
For more information about Prestashop Mobile Order Lookup:
Prestashop Multi-vendor Marketplace addon by Knowband is an effective way to convert your PrestaShop eCommerce store into a fully functional online marketplace. PrestaShop Marketplace Module provides store admin with the opportunity to enhance the reach of their store and offer a variety of items and services to customers. The PrestaShop Multi-Seller Marketplace module can turn your eCommerce site into a complete marketplace. The store admin can manage the inventories, orders, products, and shipping methods at the Marketplace from the backend of the PrestaShop Multi-seller Marketplace Module. The PrestaShop marketplace owner can charge a commission to the sellers/vendors on the products they sell. Sellers will get the chance to promote their brand and serve the audience of Marketplace in return for the commission they are paying to the admin.
Prestashop Multi-Seller Marketplace is now GDPR compliant.
1.1 Admin Benefits of Prestashop Multi-vendor Marketplace Module:
The store admin can convert their eCommerce store into a marketplace with a few button clicks.
The store admin can now make their marketplace compliant with the GDPR EU laws. The compliance enables by toggling a button in the admin interface of the Etsy clone for PrestaShop.
Admin can add custom fields for the seller’s profile. moreover, the admin can add new custom fields or remove already added fields.
Admin can show custom fields in the seller’s front profile page using Multivendor Marketplace Module.
The admin can also add a separate seller registration form under the general settings tab.
Admin can select the custom field type which he wants to add like a radio button, checkbox, etc.
Admin can make these custom fields required using the “Required” tab button.
The store owner can map any custom field under a particular section in which he wants to show that custom field.
The admin can even disallow the seller to view the email ID of the customers. If the admin enables it, the sellers can request to close their shop from the marketplace.
Also, the admin can fix the commission that he wants to charge to the sellers from the back-end of the PrestaShop Multi-vendor Marketplace extension.
The admin gets complete access to approve/disapprove the products available on the marketplace. Moreover, can even fix the quantity of the new products that a seller can add to the marketplace with the help of this PrestaShop Marketplace plugin.
The admin can even auto-approve functionality just at a button toggle from the back-end of the PrestaShop Seller Marketplace extension.
Admin gets an option to approve/disapprove the seller’s profile at a button click.
The PrestaShop Multi-seller Marketplace add-on allows the store admin to track and manage the sellers operating in the marketplace easily.
The PrestaShop admin can add/remove the product or category as per the requirement from the admin interface of the PrestaShop Multi-vendor Marketplace extension.
When sellers request to add a new category to the front-end of the marketplace, the admin can view and accept/reject them accordingly.
The admin can see the seller transaction from a single tab of the PrestaShop Seller Marketplace addon. Thus, the performance of the sellers are traceable.
Store admin can view the report of the commission earned from the PrestaShop marketplace plugin.
The admin can accept/reject the reviews on the products or sellers with the help of the PrestaShop Marketplace extension.
Additionally, the PrestaShop marketplace module offers an option to create custom shipping methods.
The seller can either select the default shipping method or create custom methods from their dashboard.
The PrestaShop multi-seller marketplace addon allows the sellers to initiate payout requests from their dashboard. The admin can approve or disapprove the payout request from the back-end of the PrestaShop addon.
Admin can create various membership plans for the sellers.
Admin can also enable a free membership plan feature for the sellers for one-time use.
Store admin can send warning emails to the sellers from upgrading their membership plans.
The GDPR requests raised by the sellers are available from the back-end of the PrestaShop Multi-Seller marketplace addon.
The shop closure request of the sellers is approvable/disapproval from the admin interface of the PrestaShop marketplace extension.
Admin gets an option to automate the transaction payout request process which helps the admin to automate all the payment requests of the sellers.
Admin can add a particular amount from the panel which will always be kept on hold for the sellers.
Now, the Knowband Customer seller Ticketing System module is by default available in the PrestaShop Multi-Vendor Marketplace module.
Seller Deal Management at ease with Knowband Deal Manager Addon (available by default in PrestaShop Multi-Seller Marketplace).
The admin can choose whether free shipping is created at the time of seller registration or any other admin carrier clone is created.
1.2 Seller Benefits of the Prestashop Multi-Seller Marketplace Module:
Sellers can add any type of product to the marketplace. PrestaShop Multi-seller Marketplace extension supports all types of products, right from the simple, configurable to the virtual and bundled products.
The sellers can even request the admin to add new categories.
Also, the commission charges are fixed, so, the entire transaction is transparent.
The PrestaShop Multi-Vendor Marketplace module makes it easier for sellers to sell their products to a larger customer base.
The dashboard allows the vendors to view their profiles, products, and orders.
A separate seller’s page makes it easier for the vendors to promote their business.
Sellers can choose from various membership plans as per the requirements.
The seller can import the CSV file for products and inventory from the seller interface
Under GDPR compliance, the sellers get an option to download their details in CSV format by clicking a button.
The sellers can even request the admin to remove their shop from the marketplace. This request is processed from the back-end of the PrestaShop marketplace addon.
Now the sellers can save the images while adding the products to their shops.
1.3 Buyer Benefits
The store visitors can now choose the ideal products from a wider range of product options.
Customers get an option to review the sellers. Customers can also review the products by using our Product Review Reminder or Default Product Comment Addon.
The seller reviews aid them in their purchase decision.
Online shoppers can select the product by visiting the seller’s page.
Buyers can also become a seller in PrestaShop Multi-Seller Marketplace. They can also register as sellers.
2.0 Installation
Follow the following steps for installing the Prestashop Marketplace module:
1. Download the Prestashop Multi-vendor Marketplace add-on package.
2. Unzip the package in /modules directory of your Prestashop store via FTP manager (like Filezilla or WinSCP – download here: https://filezilla-project.org/). The folder structure for the Prestashop Marketplace addon is shown in the image below:
3. You will be able to find the Prestashop Marketplace addon, which is, ready to be installed in the Modules List in your PrestaShop store as shown below.
4. Click on the Install link to install. Once the Prestashop Multi-Seller Marketplace module is set up properly the Install button will convert to Configure.
3.0 Module Configuration of Admin Interface
In the admin panel of the PrestaShop Marketplace module, you’ll find a separate menu (named Knowband Marketplace) at the end of the menu as shown below.
3.1 How to Add Seller from the back-end of the Prestashop Marketplace?
The PrestaShop store admin can even add new sellers from the back end just by following these simple steps:
In the Main Menu of the PrestaShop store
Go to Customers -> Go to Add New Customer on the right side of the page or click on the ‘+’ sign on the top right side of the page as shown below.
You’ll go to the Customer creation page. A new block will appear at the bottom asking for the Seller Account Configuration.
The admin can add a new seller by filling up the form and a new information block that appears right below. From here a new customer can register as a seller as shown in the image below.
Prestashop Marketplace Menu
The PrestaShop Multi-vendor Marketplace Menu consists of several sub-menu options that direct the users to several pages in the PrestaShopMulti-Seller Marketplace Addon. Here is the list of sub-menus options shown in the image below: All the configuration options are available below in detail:
Marketplace Dashboard:
We have recently added the dashboard section in the PrestaShop Multi-Seller Marketplace addon. In the following section, the PrestaShop admins can track all sales, orders, commissions, and much more.
Instance, the PrestaShop store admins can have a glance at total sellers’ earnings, admin commissions, and other details.
4.0 General Settings
The PrestaShop Multi-seller Marketplace Module’s Settings tab divides into 2 levels i.e. Seller Level Settings and Global Level Settings. This page below only controls the Global level settings for the PrestaShop Marketplace Module.
4.1Settings
This page has all the common settings that control the PrestaShop Multi-seller Marketplace extension and its several other features.
4.1.1 Settings
The general settings page consists of the following fields:
Firstly, the admin can Enable/Disable the module.
Enable CSV Import/Export– Allow sellers to import/export the CSV files for the products and combination.
Default Commission: The PrestaShop Multi-vendor Marketplace Extension allows the admin to fix and change the commission being charged to the sellers. This section sets the default commission percentage that will charge from the sellers from the total sales made by them.
Enable/Disable Seller Registration Message: The following setting will enable/disable the seller registration message (welcome message at the time of registration).
Approval Request Limit: It is the maximum number of requests that a seller can make to get a new seller account. This limit will be set for each seller after registration with his account and cannot be changed later.
Payment Methods Available: Select the payment methods you want to allow for transactions.
New Product Limit: Here admin can enter the maximum number of new products that a seller can add. After this limit, the seller cannot add any new product without the approval of the admin.
Allow Free Shipping: This setting will allow/disallow to use of a free shipping voucher.
Listing Meta Keywords: Add all the meta tags (separated by comma) by which your customers can search the Seller Listing Page via Search Engines.
Listing Meta Description: Add the description to the meta tags added in the above field.
Custom CSS:
In the following text field, the admins can add the customized CSS they want to show on the front end.
Custom JS:
The Custom JS text field offers the admin to add Java Script Manually for the front end.
Categories Available: This option shows the categories that the admin allows for the sellers to add products. If the admin selects no category, all the categories are there. In addition, if he selects some of the categories, it means that only those categories are there.
4.1.2 Seller Settings
Admin can control many features for the seller profile.
Enable Seller Registration: By enabling this button, the admin can allow the new or existing customer who is not a seller to register as a seller. The same ‘Register as Seller’ option is available in the Customer Tab of the PrestaShop store as well as in the front-end of the marketplace.
Separate Seller Registration Form:
Admin can add a separate seller registration form under the “General Setting” tab of the PrestaShop Multivendor Marketplace. By allowing this functionality admin is also able to add more custom fields in the seller registration form like shop title, seller contact details, seller country, etc.
Enable Seller Review: Enable this field, in case you want the customers to review the seller.
Enable/Disable Custom Product features addition: Enable this field, in case you want to add custom product features.
Allow Seller to add customized Products: Enable this field, in case you want to allow sellers to add customized products.
Enable/Disable Manufacturer add option: Enable this field, in case you want to add the manufacturer option.
Activate/Disable Supplier add option: Enable this field, in case you want to add the supplier option.
Enable/Disable Seller shortlisting functionality: Enable this field, in case you want to add seller shortlisting functionality.
Seller Review Approval Required: Enable this field in case you want the seller review to approve before it becomes visible on the storefront.
Display sellers on the front: Enable this field in case you want to show a link in the header of the PrestaShop marketplace front-end about the seller’s listing page. If this setting is on disable then the seller listing page. In fact, the Sellers listing options will display in the front-end as below:
Display Product Wise Seller Details on Success: If the admin enables this feature, the seller details will be shown on the order confirmation page.
Display Seller Details on Product Page: When the option is on enable, the seller’s detail displays on the product page.
Allow Seller to define own Custom Shipping Method: Enable this functionality to allow the sellers to define their shipping methods. In case, this feature is off, then, only the default shipping methods defined by the admin be shown in the Shipping tab of the seller’s dashboard.
In case, this feature is on, then, the seller will get an ‘Others’ option in the front-end as shown in the image below:
The seller can select ‘Others’ to add his custom shipping methods.
Seller Agreement: The seller agreement is customizable from this section of the PrestaShop Multi-vendor Marketplace plugin. The same agreement is visible to the sellers once they register themselves in the PrestaShopMulti-Seller Marketplace.
Enable/Disable Product Type Selection:
This setting will allow the admin to enable/disable the product type selection functionality for seller on the front.
Use Admin Career as Seller Default Career:
This setting will allow using the admin carrier as the seller’s default carrier which was automatically created for the seller.
4.1.3 Order Settings
Admin can configure the order setting, email alert options for orders, and many more.
Send Email to Seller on Order Place: Enable this field to send an email to the seller in case an order comes for the seller’s product(s).
Send Email to Seller on Order Cancellation: Enable this field to send an email to the seller in case an order cancels for the seller’s product(s).
Select Status for order cancellation: Select the order status for which the order marks as canceled.
Allow Order Handling: This setting will enable/disable the sellers to manage and change the order status, manage the shipment of the orders and generate the invoice for their products.
Available Order Status to Seller: The seller can change the order status to the selected order status only if order handling enables.
Deduct Shipping Cost on Order Cancellation: If the admin enables this feature, it will deduct the shipping cost from the seller earnings on order cancellation if order handling enables.
Deduct gift wrapping Cost on Order Cancellation: If the admin enables this feature, it will deduct the Gift Wrapping cost from the seller’s earnings on order cancellation if order handling enables.
4.1.4 KnowBand Module Settings
Here, the admin can enable/disable the Knowband modules.
Enable/Disable Knowband Return Manager Module Compatibility: Enable this field, in case you want to add Knowband Return Manager Module Compatibility.
Allow Seller to create a new Return Policy: Enable this field, in case you want to allow the seller to create a new return policy.
Enable/Disable Knowband Booking Calendar Module Compatibility: Enable this field, in case you want to add Knowband Booking Calendar Module Compatibility.
Enable/Disable Knowband Product Availability by zipcode Module Compatibility: Enable this field, in case you want to allow zipcode module compatibility.
Enable Compatibility with Knowband Product review Plugin: Enable this field, in case you want to allow compatibility with the product review plugin.
Enable Seller Ticket System: Knowband Multi-vendor marketplace now have an option for enabling/disabling the seller customer ticketing system. You can turn on the module by choosing the yes or no option.
Enable Deal Manager: Likewise, seller ticketing system, we have also added Knowband Deal Manager Module with the Knowband Multi-Vendor Marketplace module. You can enable/disable the same from the yes/no buttons provided in the general setting panel.
4.2 Email Templates
Various email templates are available for multiple actions. There is a total of 30+ default email templates which include subjects like welcome email, seller account approval, approval notifications, transaction emails, order status templates, etc.
Edit the email template
Admin can edit the default email templates.
4.3 PayPal Payout settings
The admin can use PayPal if sellers opt for this payment method.
Admin has to add the PayPal details in PayPal Payout Settings.
Enter the API details of the PayPal details as shown in the image below:
Active: Toggle the button to activate the PayPal payout settings.
Client ID: Enter the Client ID of your PayPal account here.
Client Secret: Enter the secret key here.
PayPal Mode: Select the mode, that is, Sandbox or Live from the options drop-down menu.
The PayPal Email Subject: Enter the email subject for PayPal here.
PayPal Currency: Select the default currency set in your PayPal account.
Enable Automatic Seller Payout: Toggle the button to activate automatic seller payout.
Amount to keep on hold: Enter the amount which will always be kept on hold for sellers.
5.0 GDPR
Since GDPR is mandatory in many countries, the admin can configure the PrestaShop marketplace module with GDPR.
5.1 GDPR Settings
The store admin can enable the GDPR settings by clicking a few buttons in this section of the Prestashop marketplace addon. The various fields are visible below:
Enable GDPR: Toggle this button enables GDPR compliance.
Enable Display Customer ID to seller: Enable this feature if you want to display the customers’ ID to the third-party sellers.
Option to close Shop: If this feature enables, then, the sellers will get options to request for the shop closure. It displays a section in the tab in the dashboard of the sellers from where the request raises.
5.2 GDPR Requests
The sellers can download their data in CSV format just by clicking the links provided in the GDPR section of the dashboard.
The admin can view the GDPR requests initiated from this section in the back-end of the Prestashop multi-vendor marketplace module as shown in the image below:
5.3 Seller Shop Close request
Ifthe admin enables this feature from the back-end of the Prestashop multi-vendor Marketplace plugin, the sellers can request the admin to close their shop.
The request to delete the sellers’ account initiates by just clicking a couple of buttons from the dashboard. The image of the front-end interface is shown below:
Once the request is sent, the admin can view the same from the Seller Shop CloseRequest tab of the Prestashop multi-seller marketplace extension.
The confirmation mail is sent to the seller. Once the sellers provide the confirmation, an ‘Approve’ button displays corresponding to the request. The admin can click the same and complete the request.
The entire list of the shop closure request and their status is displayed in this section of the Prestashop multi-seller marketplace plugin as shown in the image below:
6.0 Sellers
6.1 List of Sellers
This page of the Prestashop Multi-seller Marketplace extension has a list of all the sellers that the store owner approves.
There are several filters as well to filter the list of sellers as shown in the above screenshot.
The above figure consists of a list of all the sellers that clear the approval.
The admin can also enable or disable a seller in this list using the bulk actions of the grid.
If a seller disables, then, all the products of that seller also disable. Moreover, will not be visible on the storefront.
When you click on the view button, a new page opens up consisting of information about the seller.
6.1.1 How can the admin edit the Sellers Profile from the backend?
To edit the seller’s profile, follow the below-mentioned profile:
Go to Customers -> Select a Customer who is also a seller -> Click on Edit link on the Customer Information Page
In case, the store admin can edit a seller’s profile just by clicking on the Edit button corresponding to the profile. The admin can edit the profile just as they edit the customer’s profile.
When this page loads for the first time the fields have the default settings that are pre-defined for the addon.
6.2 Pending Seller Approval
Seller Account Approval Request
When a seller registers or any customer registers as a seller on the Prestashop marketplace, then, it first appears in this tab of the Prestashop Multi seller Marketplace module. The store admin can approve or disapprove of the seller account request.
Approve Seller Account: To approve a seller’s account, you have to click on the “Cross” button corresponding to that seller on the list from the backend.
Once the Seller account approves it directly moves to the Sellers List. Moreover, all the limits to the seller account release.
A mail will be sent to the seller to notify him about the approval of the seller account.
Note:- The Seller Accounts that the store owner approves cannot be undone. Please use this feature carefully.
Disapprove Seller Account: To disapprove of a seller account, you have to click on the “tick” button in front of that seller on the list.
A pop-up will appear asking for the reason for disapproval of the seller account. Fill out the reason and then submit the form to complete the action.
A mail will be sent to the seller notifying the disapproval of the seller’s account. The reason provided in the pop-up will also be sent in this mail.
Note:- Once a seller request disapproval then he can again apply for the seller account. In addition, whenever a seller does this the store owner gets a notification email.
6.3 Custom Fields
Now admin can add custom fields for the seller profile page and even make them required for the sellers to fill out.
Custom Fields Type Selection:
Admin can select the custom field type that he wants to add on the seller profile page. Further, the admin gets lots of options. For instance, checkbox, radio button, text box, etc.
6.3.1 How to Add New Custom Fields for Seller Profile in PrestaShop Multi-vendor marketplace?
Custom Fields for Seller Profile:
Admin can add new custom fields for the seller’s profile under the “Profile Form Custom Fields” tab. In fact, with the help of this tab, the admin can add new custom fields or delete already added custom fields for sellers’ profiles using PrestaShop Multivendor Marketplace.
Custom Fields Type Selection:
Admin can select the custom fields type which he wants to add on the seller profile page. Further, the admin gets lots of options. For instance, checkbox, radio button, text box, etc.
Category-wise Custom Fields:
Admin can map the custom fields in a particular category using the “Section” tab under Profile Form Custom Fields. Thus, with the help of this admin can map the custom fields category-wise.
Make Custom Fields Required:
Admin can make these custom fields required using the “Required” tab.
Show Custom Fields on Seller Front Page:
With the help of the PrestaShop Multivendor Marketplace, the admin can show the custom fields on the seller’s profile page. Further, the admin can allow this functionality under the “Profile Form Custom Fields” tab.
6.4 Category Wise Commission
Now, the admin can easily divide the commission according to the product category. Thus, the admin can make new categories too accordingly.
In the above screenshot, the admin can set a new category by entering a default commission. In fact, this enables the admin to charge different commission rates for different product categories.
Admin can edit the commission rule by clicking the edit option at any point in time.
6.5 Seller Review
This seller Reviews tab of the Prestashop Multi-seller Marketplace extension contains a list of all the Sellers Reviews done by customers in the store.
If the admin disables the setting (i.e. Seller Review Approval Required), then a seller review approves directly. Further, when the customer adds. In addition, appears on this list. Otherwise, the review first appears in the Seller Review Approval list.
Note:- The Seller Reviews that the store owner disapproves of also appear in this list.
View Seller Review: To view all the details of a seller review you have to click on the View button in front of that review in the list.
On clicking the View button, a Pop-up will appear having all the details of the corresponding seller review.
6.6 Seller Reviews Approval
This tab of the Prestashop Multi-vendor Marketplace extension contains all the Seller Reviews. Furthermore, the ones that the customers post. In addition, no action is happening about them.
If the admin enables these settings (i.e. Seller Review Approval Required), then, only any seller review posted by any customer appears in this list otherwise, it directly appears in the Seller Reviews list.
The reviews that are pending approval are showcased as in the image below:
View Seller Review: To view all the details of a seller review you have to click on the View button in front of that review in the list.
On clicking the View button, a Pop-up will appear having all the details of the corresponding seller review.
Approve Seller Review: To approve a seller review, you have to click on the Approve button in front of that review on the list.
Once a seller review approves from the backend, it becomes visible on the front end. In addition, is transferrable to the seller review list.
Note:- This action cannot be undone. Please use it carefully.
Disapprove Seller Review: To disapprove a seller review, you have to click on the Disapprove button in front of that review on the list.
A pop-up will appear asking for the reason for disapproval of the seller’s review. Fill in the reason and then submit the form to complete the action.
Once a seller review disapproves, it is transferable to the seller reviews list and cannot be found anywhere else.
Note:- This action cannot be undone. Please use it carefully.
Delete Seller Review: To delete a seller review, you have to click on the Delete button in front of that review on the list.
A pop-up will appear asking for the reason for the deletion of the seller review. Fill the reason and then submit the form to complete the action.
Once a seller review deletes, it is completely removed from everywhere.
Note:- This action cannot be undone. Please use it carefully.
All this can happen with a button click with the help of the Prestashop Marketplace extension.
6.7 Seller Shipping
Whenever a new seller adds to the system, a default shipping method is also available that applies to all the products by default. Moreover, it is free as well.
The seller can add a new shipping policy and can map products to it as well, but until then, all the products are mappable to the default shipping policy only.
The Seller Shipping tab of the Prestashop Multi-vendor Marketplace addon page contains a list of all the shipping methods. Furthermore, the ones that the admin creates for the sellers are present in the system.
View Shipping: To view the details of a seller shipping, you have to click on the View button in front of that entry.
On clicking the button, a new page opens up having details of the respective shipping method.
The page will display Profile Status, Business Profile, Carrier Information and payment information (bank wire details)
Note:-
The admin will not be able to delete or edit any shipping method for any seller. In fact, if tries he/she will redirect to the Carrier Listing page with the corresponding error.
By default, all the products for a seller will be mappable to the Default shipping method for the respective seller. Thus, the default shipping methods are identifiable with the name Default Free Shipping – Seller Name.
6.8 Seller Shipping Method
Prestashop multivendor marketplace extension allows the sellers to define their shipping methods. For this, the ‘Allow Seller to define own Custom Shipping Method’ feature enables from the Setting tab of the Prestashop marketplace module.
6.8.1 How can the admin add Shipping Methods?
The admin can add custom shipping methods in this tab. To add custom shipping methods, click on the ‘Add New Shipping Methods’ link or the ‘+’ sign in the top-right position.
This will redirect you to the shipping methods creation page of the Prestashop marketplace addon.
Shipping Method Name: Enter the name of the shipping methods.
Active: Toggle the button to activate or deactivate the shipping method.
The shipping methods will be available as shown below. The admin can edit or remove them by clicking on the Edit or Delete button corresponding to each shipping method.
6.8.2 How can the Seller add custom Shipping Methods that they want to allow the customers to select?
The seller can create their shipping methods from their dashboard. Go to the Dashboard -> Shipping tab.
The various shipping methods that the seller creates are available in this tab.
To add new methods, click on the ‘Add New’ link as shown in the image below:
You’ll redirect to the shipping methods creation page. Further, the various field required to be filled are shown below:
The various shipping methods will list in the drop-down menu. To create a new one, select ‘Others‘. Enter the name of the shipping method.
The sellers can create the shipping methods by entering the required fields as shown in the image below.
6.9 Seller category Request list
A seller can add products only to those categories that the admin allows to him/her. However, if the seller needs to add a product to a category that is not he does not allow, then the seller can request for the category. All those category requests appear on this list. A mail is also sent to the store owner to notify them about the Request for Category. Then, it is up to the store owner to approve or disapprove the request.
View Category Request: To view the details of a category request, you have to click on the View button in front of that category request on the list.
On clicking the View button a Pop-up will appear having all the details of the corresponding category request.
Approve Category Request: To approve a category request, you have to click on the Approve button in front of that category request on the list.
Note:- This action cannot be undone. Please use it carefully.
Disapprove Category Request: To disapprove of a category request, you have to click on the Disapprove button in front of that category request on the list.
A pop-up will appear asking for the reason for disapproving the category request. Fill out the reason and then submit the form to complete the action.
Note:- This action cannot be undone. Please use it carefully.
7.0 Products
Product setting includes the seller product configuration, product approval list, and product review.
7.1 Seller Products
The Seller Products page of the Prestashop Multi-vendor Marketplace add-on consists of all the approved products added by the seller(s) on the store.
If the admin disables the settings (i.e. New Product Approval Required) in the Setting tab of the Prestashop Marketplace module, then a product approves directly when it is added by the seller and appears in this list. Otherwise, the product first appears in the Product Approval list.
Delete Product: To delete a product, you have to click on the Delete button corresponding to each product as shown in the image below.
A pop-up will appear asking for the reason for the deletion of the product. To complete the action, fill in the reason. Further, click on the submit button.
A mail will be sent to the seller to notify the deletion of the product. The mail also contains the reason you have provided for the deletion of the product.
Note: The product delete action cannot be undone. Please use this feature carefully.
Enable/Disable Product: To change the status of any product, you have to use the Bulk Action feature of the Grid. To enable/disable any product, select the product(s) and choose the action (i.e. Enable or Disable) to complete the action.
Note: Once a product is disabled, it will not be visible at the front. To avoid disabling products and only disable a product if it is very necessary.
View or Edit Product: There is also an option to view the details of any product on the list. To do that you have to click on the View button in front of that product and it will take you to the edit page of the respective product. Further, on clicking the view button, you’ll redirect to the products detail page as shown below:
Admin can update the product settings. Knowband’s PrestaShop Marketplace Module provides options for updating the quantity, and shipping options like delivery time, date, shipping fees, etc. Moreover, the admin can update the pricing of the product.
For Google rankings, the product SEO can be updated.
7.2 Products Approval List
When a seller adds a product, then, first of all, it appears in this tab of the Prestashop Multi-vendor Marketplace extension. The store owner is also notified of the same through the mail. Then, it is up to the store owner to approve or disapprove of the product.
If the setting (i.e. New Product Approval Required) enables only then, a new product appears on this list. Otherwise, it directly appears in the Product List and approves automatically and is visible.
Disapprove Seller Product: To disapprove of a product, you have to click on the Disapprove button corresponding to that product on the list.
A pop-up will appear asking for the reason for the disapproval of the product. Fill out the reason and then submit the form to complete the action.
Once a product disapproves, a mail will be sent to the seller notifying disapproval of the product with the reason provided in the above form. The products that don’t get approval also appear on the same list. The Store admin can approve them at any point in time.
Approve Seller Product: To approve a product, you have to click on the Approve button in front of that product in the Product Approval list.
After approval, the product is moved from the Product Approval list to the Sellers Products list.
Note:- This action cannot be undone. Please use it carefully.
7.3 Product Reviews
The Product Reviews page of the Prestashop Marketplace plugin consists of a list of all the product reviews sent by customers on the seller’s products.
The online buyers can add a review on any of the seller’s products as shown below:
Once the review is posted by the customer, he’ll get a message saying that “Your comment has been added and will be available once the moderator approves them.”
These reviews are then listed in the Product Review tab of the Prestashop Multi seller Marketplace plugin.
View Product Review: Most of the details of the product reviews are already mentioned in the grid but some of them are not. To view all the details of any Product Review, click on View Button in front of that review. A pop-up will appear having all the details of the product review.
As you click, you can see the complete review as shown in the image below:
Delete Product Review: To delete a product review, you have to click on the delete button in front of that product review on the list.
Note:- The product review deletes action cannot be undone. Please use this feature carefully.
Approve Product Review: The product reviews that are added by the customers for the seller’s products will appear in the list here with the status Waiting for Approval and it will not be shown on the storefront to other customers until the approval. To approve it, you have to click on the Approve button in front of the product review.
8.0 Orders
Admin can view, edit and update the order status for both seller and admin orders.
8.1 Sellers Orders
The Seller Order Tab of the Prestashop Multi-vendor Marketplace Addon consists of all the orders that are placed by customers for products added by sellers in the store. The orders shown in this list are split based on sellers which means, if there are products by different sellers in the same order then they will appear separately in this list.
View Order: There is also an option to view the details of any order on the list. To do that, you have to click on the View button in front of that order, it will take you to the order details page of the respective order. This view page is the same as when you edit any order.
As you click on the View button, you’ll redirect to the order page as shown below:
8.2 Admin Order
The Prestashop Marketplace module allows the store admin to sell more and more products without maintaining their inventory. However, the admin can even sell their products in the marketplace. The orders received for the products of the admin can be viewed in the Admin Order tab of the Prestashop Multi-seller Marketplace addon. The orders will be displayed as shown below. To see the details of the order, click on the View button corresponding to each order.
The order details page is shown in the image below:
9.0 Commissions
The PrestaShop Multi-seller Marketplace module makes it easier for the store admin to manage the commission structure of the marketplace.
9.1 Admin Commission
The Admin Commissions tab of the PrestaShop Multi seller Marketplace extension contains a filter through which the admin can filter the commissions earned in the form of Order Wise or Category Wise selection. By default, the page shows Order Wise Admin Commissions.
9.1.1 Order Wise Admin Commissions
This list contains all the commissions earned by the store owner on every order placed for any seller’s product. This list is split based on orders placed for selling products.
9.1.2 Category wise commissions
This list shows the total commission earned by the store owner from a seller. The store owner can also use filters to filter the commission reports category-wise.
It helps the store owner to identify commissions from different categories and which category has produced how much commission.
9.2 Seller Transaction
The system does not automatically transfer the amount in the seller’s account, hence the store owner has to keep records of the balance for all the sellers and manually transfer money to the seller and later on, enter the details of the transaction to keep a record of the same.
The Prestashop Marketplace module allows the admin to view two types of transactions of the sellers, that is, Seller Balance History and Transaction History.
The Seller Transactions page of the Prestashop Multi-vendor Marketplace plugin keeps the track of the seller transactions and the remaining balance of sellers.
9.2.1 Seller Balance History
This list of the Prestashop Multi-seller Marketplace plugin contains all the balance variations for all the sellers in the system. The list shows the total sales of the seller, seller’s earnings, and your commission. This list helps the store owner to identify the earnings and categorize them seller-wise.
View Transactions Details
To view the details of the transactions done for a particular seller, you have to click on the View button in front of that seller.
On clicking on the View button in front of any seller, a new page will open up having a list of all the transactions done for the corresponding seller.
You can also add a new transaction for the current seller by clicking on the Add New Transaction button on the top right-hand side of the below page.
9.2.2 Create New Transaction from the back-end of the Prestashop Multi-vendor Marketplace Module
To add a new transaction detail for any seller, you have to either click on the Make New button in front of the seller or you can also click on the Make New Transaction button on the top right-hand side of the page.
9.2.3 Transactions History
This page contains a list of all the transactions done to date to all the sellers available in the system.
You can also add a new transaction for any seller by clicking on the Add New Transaction button on the top right-hand side of the above page.
9.3 Transaction Payout Request
With this additional feature, the sellers can request the store admin for any payout. Earlier, the admin was in charge of any of the payment that was to be made to the sellers. However, the sellers can now initiate a payout request from their dashboard. The admin can approve or deny the payout request of the sellers from this tab of the PrestaShop multi-vendor marketplace addon.
Three payment methods are provided, that is, Bank Wire, Pay by Check, and PayPal.
The admin can use PayPal if this payment method is opted by the sellers.
Admin can enable automatic seller payout which helps the admin to automate the payout request process. Further, the admin can either use cron URL’s for this setup or use the “Process Paypal Payout Status” cron directly.
Admin can also add a particular amount which will always be kept on hold for sellers.
Note: Refer General Settings section for PayPal Payout Settings
How can the seller create a Transaction Payout Request?
To create the payout request, the seller is required to click on the Payout Request tab of the dashboard of their account.
The various fields required to be filled by the seller are discussed below:
Amount: Enter the amount that you are requesting for the payout.
Request Reason: Specify the reason for which the payout request has been initiated.
As the Save button is clicked, the payout request will list as shown in the image below:
The same payout request will list in the admin interface of the Prestashop multi-seller marketplace extension.
9.3.1 How can the admin approve/disapprove the Transaction Payout Request?
The admin can approve or reject the payout request by clicking on the Approve or Disapprove button corresponding to each request.
In case, the admin approves the payout, then, a popup will be displayed as shown in the image below:
If the payment methods are Bank wire or Pay by Check, then, the admin will have to enter the Transaction ID.
Once the request is successfully approved, the transaction will be saved in the Transaction Table.
In the case of the PayPal payment method, a request will be sent to PayPal and based on the response, success or error message will be displayed. If the request is successfully approved, it is added to the Transaction table.
10.0 Membership
Prestashop multi-vendor marketplace admin can create and update multiple membership plans for the sellers.
10.1 Settings
This page contains all the settings which the Store admin needs to control the membership plans. Enable membership plan functionality: By enabling this button store admin allows all the new and existing sellers to purchase a membership plan.
Send membership plan activation email: If the admin enables this feature, an email is sent to those sellers whose membership plan is activated.
Membership plan activation email template: Update the email template as required.
Send membership plan expiry email: If the admin enables this feature, an email is sent to those sellers whose membership plan is expired.
Membership Plan Expiry Email Template: Update the email template as required.
Show warning message: Store admin can use this feature to show a warning message to those sellers whose membership plan is about to expire.
Number of days left to upgrade plan: Store admin can also adjust the number of days to upgrade the membership plan. A warning message will be shown to the sellers during this time period for upgrading their plans.
Enable disable free membership plan: If the admin enables this feature, a free membership plan will be added to the seller’s membership plans.
Enable disable product active limit under the free membership plan: Store admin can enable and disable the product listing limit under the free membership plan
Product limit: Store admin can adjust the product listing limit using this tab.
Duration interval: The admin can adjust the duration interval of the free membership plan. For example: days, months, and years.
Duration: The admin can set the duration of the free membership plan after which this plan is deactivated.
Select the order state in which the membership plan will be marked as paid: Admin can select the order state on which free membership plan orders will be marked as paid.
Show membership plans select box during seller registration: If the admin enables this feature then sellers can select the membership plan at the time of registration.
10.2 Warning Plan Reminder settings
Admin can enable this functionality to send a warning email to the sellers whose plan is about to expire. Admin can set the number of days before plan expiry warning mail should be sent to the seller.
10.3 Expired Plan Reminder Settings
Admin can enable this functionality to send an email to those sellers whose membership plan
Admin can also set the number of days after the plan expiry warning email should be sent to the seller.
Moreover, the admin can customize the reminder email template.
10.4 Membership Plans
Store admin can create a new membership plan under the membership plans tab. After clicking on the add new button, a new membership plan form will be open with the following fields:
Plan name: Admin can set the Plan name which is displayed to the sellers.
Plan price: Admin can set the plan price using this tab.
Enable/disable product active limit: Using this feature admin can enable the product listing limit for that particular membership plan.
Plan duration interval: Store admin can set the plan duration interval using this tab.
Duration: The admin can set the duration for which the plan remained active.
Enable: Using this tab admin can enable or disable the membership plan.
Plan image: Admin can choose the plan image that he wants to show to the sellers.
10.5 Seller Membership Plans
From this tab, the admin can check the seller’s plan details like their first name, last name, email, shop name etc.
From the add new option, the store admin can add new seller plan details by filling in the following details:
Choose sellers: Admin can choose the seller for which the admin wants to add plan details.
Add customized plan: Admin can also customize the plan details by filing the plan name, product active limit, duration interval, and duration details.
Mark plan as approved: If the admin enables this feature then the seller plan will approve.
Activate plan: The store admin can activate the seller’s plan by enabling this button.
Seller Deals: In the following tab, the PrestaShop store admins can keep the track of the seller’s deals. Moreover, here we have provided various details such as deal type, reduction type, reduction, starting date, and deal ending date.
11.0 Seller Interface of PrestaShop Marketplace Module
Any seller has access to several pages that are designed for handling the functionality of a seller account. The link for all these pages is there on the My Account page of a customer who is also a seller.
Another way sellers can access the dashboard is displayed in the image below:
11.1 Seller Dashboard
The seller dashboard displays the analytics data of the sales, earnings, and total orders along with the number of products sold.
The seller can see the sales statistics, compare the sales data and check out the last order details as well.
Register As Seller Field (Register Page)
If a new customer is registering on the Store then simply enter your mail id according to the screenshot given below.
After clicking on “Create an Account”, you have to enter your information as given in the screenshot below.
Once the merchant becomes a seller of the marketplace, he can avail of all the functionality of the module and boost his sales effortlessly.
The Dashboard of the sellers includes a GDPR section. The customers can download their data and can even delete their accounts with ease.
11.2 Seller Profile
The sellers can edit their profile and personalize their shop from this tab of the dashboard.
From the seller profile section, a seller can update the general setting for their seller page view, add meta descriptions, create policies, and request payouts to the store admin.
11.2.1 How does Seller Profile Appears to customers?
Customers can visit the seller profile and shop from a particular seller too.
11.2.2 Customer can buy products from an individual seller
For visiting the seller page, the customer has to click on the seller’s profile then they will redirect to the seller’s shop.
11.3 Seller’s Product
The sellers can follow the path mentioned below in order to add a new product.
Go to My Account -> Dashboard -> Products
The already listed products are displayed in this tab of the seller’s Dashboard.
In order to add a new product click on the ‘+’ sign at the top right portion.
This will redirect you to the ‘Add New Product’ page. Fill up the required detail in order to add the product.
11.4 Order
The sellers can view their orders and related details in this tab of the Dashboard.
11.5 Product Reviews
The sellers can view the review received on their product in the Product Review Tab of their Dashboard. All the reviews received will be listed as shown in the image below:
11.6 My Reviews
The tab of the seller’s dashboard lists the reviews received on their profile.
11.7 Earnings
The total earnings of the seller are visible in this tab. The vendors can filter the results as per requirement.
The total earning history is visible as shown below:
11.8 Transactions
The seller can view their entire transaction history in this tab. The amount debits or credits in their account are visible here.
11.9 Payout Request
Sellers can view the list of payout requests sent to the admin from the Payout Request tab. For a new payout request, sellers need to fill in the payout amount and reason and send it to the admin for approval.
11.10 Category Request
The sellers can view the categories assigned to them. Additionally, they can even send a category request to the store admin. In order to send a category request, go to the Dashboard -> Category Request
11.11 Shipping
The sellers can view the shipping process as in the screenshot below:
11.12 CSV and XML
Also, the admin can import/export the products and combinations in CSV and XML formats.
11.13Membership plan history
Sellers can check their membership plan history by applying filters. Under the filters, sellers have to fill in the plan name and the status of the membership plan for checking the history of the membership plans.
11.14Available membership plans
Using this tab sellers can buy membership plans by checking the plan details.
Seller Customer Ticket System:
Knowband PrestaShop multi-seller marketplace provides a separate tab for managing tickets between customers and sellers. In the following tab, the sellers can find all the ticket details such as customer email address, last updated date, ticket number, etc. Moreover, we have also provided an option to search the tickets based on the filter options (customer name, customer email, status, from date, end date).
Seller-Customer-Ticket System: Front End Preview:
The customers will get an option on the seller’s products pages for “contact the seller”. After clicking on the same, they will be redirected to the above-mentioned page.
Here, the customers can fill out the details such as email, name, phone number, ticket subject, and issues regarding the tickets.
After submitting the details, the sellers can check the tickets on their personalized dashboard.
Discounts and Offers:
In the discount and offers tab, the sellers can create their own coupons and offers (applicable only to the seller’s products).
Here, we have provided the options for choosing a start date, offer end date, running status, deal type, and discount type (percentage/fix).
For more information on the Prestashop Multi seller Marketplace extension, refer to the following links:
The Prestashop Helpdesk Module by Knowband acts as a Ticket Management System for a particular store that makes easier for the merchant to manage the ticket which will be raised for his store by the customer.
The Prestashop customer helpdesk module is very useful for both the ends i.e for the merchant and the customer because it lets the customer raise the ticket in a very convenient way and at the other end lets the merchant manage the ticket in a very efficient way. This extension also shows the merchant the details of the customer those who have raised the ticket on his/her store.
To install this Prestashop addon, please follow the following steps:
1. Add addon folder under modules folder of your system.
2. After adding this addon folder, system will list the addon on module page under front office feature category as given below:
3. Click install to install Prestashop desktop helpdesk plugin.
Administration Module
After the Prestashop module is installed a new entry in the menu bar of the shop starts appearing in the back end with the name DESKOID. This menu will be containing a sub menu which further will be containing following options.
Each section of the Prestashop customer helpdesk is described in details below.
Tickets
After the admin will click on this option of the sub menu of the Prestashop customer contact addon, a new page will appear which will be containing all the tickets raised by the customers
1. Ticket Number: This field of the Prestashop ticket system will be having a number value which will represent each of the ticket uniquely i.e each ticket will be having a unique ticket number.
2. Topic/Subject: This field of the Prestashop contact us addon will be having the topic to which a ticket has been raised. These fields will be already described in the back end and will be discussed later in the manual.
3. Summary: Here the summary of the ticket will be present which will be entered by the customer when he/she will be raising the ticket in the front end of the Prestashop desktop helpdesk.
4. State: This field of the Prestashop customer helpdesk will show the current state of the ticket. It may be open,closed,on hold,Progress, Waiting for reply, unknown.
5. Priority: The priority of the ticket will be represented in this field of Prestashop customer contact. It will be having the options like: Low, normal, urgent , high, unknown.
6. Actions: Their will be many action for each ticket-
a) Change State: This action of the Prestashop ticket system will let the admin to change the state of the ticket to what he wants.
b) Change Priority: On clicking on this action the admin can change the priority level of a particular ticket.
c) View State Changes: This option of the Prestashop contact us addon will show the admin that how the state of a particular ticket has changed from the item it has been raised.
d) View Priority Changes: This field of the Prestashop desktop helpdesk will do the same as the view state changes action but will show the changes done in the priority of the ticket.
7. View Ticket: When the admin will click on the view ticket action then it will link the admin to an another page in which all the details with the conversation thread of the ticket will be mentioned. Admin can view all the details of the ticket here and can change the state and priority of the ticket. Admin can also reply to the customer from this page and all the details will be mentioned in the conversation thread given below the page.
Customers
In this menu of the Prestashop customer helpdesk the admin can view all the customer those who have raised the tickets on the store. The admin can also view their email id, phone number , customer name and which type of customer has raised the ticked i.i it is a registered customer or a guest customer.
Ticket Topics
This sub menu of Prestashop customer contact plugin will be having all the topics which will show up in the front while the customer will raise the tickets. The customers can raise the tickets below these topics only.
The status of each topics can also be changed by just clicking in the active link in the row of each topics respectively. If the topic is not active then it will not appear in the front end of the customer drop down menu when they will raise the ticket.
Each topic can also be edited and can be stored in different languages in the back end. So the topic name of this Prestashop plugin which will be appearing in the front will be according to the language of the store and the settings done for each topic name.
Configuration
In this sub menu of the Prestashop plugin by Knowband a button will be present which will be used to enable or disable the module in the front. If this setting of the Prestashop module is disabled than the Prestashop ticket system module will not work in the front end.
Front End Module
After enabling the Prestashop module from the back end a button starts appearing in the left hand side of the screen.
After clicking on this button of the Prestashop plugin, the user is redirected to the ticket system page where he can search a ticket and view it or he can create a new ticket.
The customer can create the ticket by using the topics which are given by admin in the back end of the Prestashop contact us addon by Knowband.
The customer can also view the conversation between him/her and admin when he views his ticket.
1.0 Introduction of Prestashop Paypal Direct Payment Addon
For the online payment system, PayPal is one of the world’s most trusted online payment solutions. The PayPal Direct Payment Addon seamless way to integrate your Prestashop eCommerce store and you can automatically receive the payment from the customers into your PayPal account. The Prestashop payment extension is basically developed for the PrestaShop eCommerce site owners to let their customers pay for their purchase credit or debit cards without having to log into their PayPal account.. This Prestahsop addon is basically a payment module that allows the store admin to automatically transfer the payments of the sales into their PayPal account.
1.1 Benefit of the Admin:
The Admin can easily integrate the module to the PrestaShop store without any hassle.
This Prestashop product payment addon gives the sandbox options to the e-merchant. Sandbox option allows the store admin to test the account and then go live.
The Prestashop PayPal payment extension enables the online store owner to enable/disable the addon any time.
This Prestashop payment module enables the store admin to select the mode i.e. Sandbox or Live mode.
The Admin can easily configure the PayPal client id and secret key.
This Prestashop PayPal payment addon is no setup fees or long-term contracts.
This Prestashop Paypal direct payment addon process the payment transactions directly on your website without redirecting to PayPal officeal page.
This Prestashop PayPal payment addon is secure, fast, easy and efficient.
1.2 Benefit of the Customer
Customer can easily pay the purchase amount without having to the PayPal account.
The Prestashop PayPal Direct Payment is one of the online payment solutions most recognized by customers.
Secure Payment method.
Technology for Development
Language: PHP FrameWork: PrestaShop
2.0 Installation
Installation Guide
To install this Prestashop Paypal payment addon to follow the following steps:
Download the Paypal Direct Payment module.
Unzip the package in /modules directory of your PrestaShop store via FTP manager (like Filezilla or WinSCP – download here: https://filezilla-project.org/).
After adding this folder, You will be able find the Paypal Direct Payment addon that is ready to be installed in the “Modules Selection” in your PrestaShop store as shown below.
In case, you are not able to find module in admin modules list, please try searching addon with following details –
Keyword – paypaldirectpayment Author – Knowband Category – Payments and Gateways Filter By – Installed & Not Installed / Enabled & Disabled
For Prestashop 1.7.x.x
4- Click on the Install link to install. Once the Prestashop extesion is installed properly the ‘Install’ link will be converted to ‘Configure’.
Note: The Module folder “paypaldirectpayment” should be writeable for the proper working of module. Please make the folder permission to 755.
3.0 Admin Interface
An Admin can access the interface of this module by navigating to the following address:
1. Navigate to Modules and Services >> Modules and Services
2. The list of modules installed on your site will open. Now search for paypal direct payment in the search box, you will find the following interface. In the following interface click on the Configure button:
4.0 Admin Configuration Panel
The Admin configuration interface looks like this:
4.1 Menu Items
Please find the description of each input below:
Enable/Disable: This is an on/off switch. The Admin has the option to Enable/Disable the Prestashop paypal direct payment addon. If enabled, then only this Prestashop addon and all its settings will be working otherwise there will be no impact of this Prestashop module on the store. Select Mode: This is a select box in which admin can select mode. Select “Sandbox” mode for testing purposes. However for actually using the Prestashop Paypal payment extension on your live store you need to select “Live” mode. Paypal User Name: This is a text box in which an admin can enter their Paypal Account’s Username. Paypal Password: This is a text box in which an admin can enter their Paypal Account Password. Paypal Signature: This is a text box in which an admin can enter their Paypal Signature.
After filling up the form, click on “Save” button to save the configuration into the system.
Note: This Prestashop PayPal direct addon support only those counties and currencies which are supported by Paypal payment method. You can check by clicking on the link as shown above whether your selected currency on the shop is compatible with this Prestashop PayPal product payment extension or not.
If you do not have a Sandbox Account, Click on the link “Create your Sandbox Account” as shown above.
5.0 Front End Interface
This interface is accessible only by a customer account who is opting Paypal to make the payment for his/her purchase on the store.
If the back end is correctly configured, a customer will see the following interface on the payment method page of the checkout process.
For Prestashop 1.6.x.x
For Prestashop 1.7.x.x
To continue with the payment through Paypal method click on “Pay by credit or debit card” as indicated in the screenshot above. Clicking the link will direct the user to the following interface:
For Prestashop 1.6.x.x
For Prestashop 1.7.x.x
Please find the description of each input below:
Country: This option shows the countries that is allowed for the customer. Choose the country to which costumer belongs to.
Credit Card Number: Enter the credit card or debit card number.
First Name: Enter your first name.
Last Name: Enter your last name.
Billing Address: Enter your billing address for the purchase.
Expiry Date: Enter credit or debit card’s expiry date.
CVV number: Enter CVV number of credit or debit card.
Zip Code: Enter your zip code of the billing address.
State: a Select state for the billing address for the purchase.
City: Enter your City Name.
Phone: Enter your Phone number.
Email: Enter your email ID.
After filling the form, Click on “Pay” button to validate your details. If it is valid then it will proceed for the payment for your purchase.
Note: Select the country and currency for the payment according to the supporting currencies and countries by Paypal payment method.
Recommendations
If Prestashop PayPal product payment addon is not working after installation then please check permissions on addon folder. The folder should be writable. Please make the folder permission to 755.
You can try Prestashop PayPal Direct Payment addon for on your Prestashop website. KnowBand’s Prestashop PayPal payment extension helps you increase customer engagement to your store & build the brand loyalty.
CSV import/export plugins enables sellers of Prestashop Marketplace to add their products using CSV. Sellers can also add combinations for products via CSV. For any updation in their products they can simply export them by choosing category or their status and after them import them back.
Steps For Installation
1. Folder structure of the CSV import/export plugin folder.
2. Copy the whole folder named as kbcsvimport into your modules folder of the root directory of your PrestaShop store through FTP.
3. After that you will be able find the plug-in ready to be installed in the Modules in your PrestaShop store as shown below.
5. After installing you have to merge attached kbmarketplace folder into your modules folder of the root directory of your PrestaShop store through FTP.
Admin Module Interface
Here store owner can only enable/disable the module.
After installing plug-in into store, the plug-in will provide Configuration tabs in the interface.
Configuration
Enable/Disable: To enable the plugin, switch the enable button from NO to YES. Default value will be NO.
Front Module Interface
After Installing this plugin a CSV Import/Export tab is added under seller Menu tab.
When the admin enables this plugin the approved seller(s) are able to use CSV import/export.
Here seller can import CSV for products as well as for combination and export their products.
CSV Import
1 . What kind of entity would you like to import : Select the entity which you like to import whether products or combinations.
2 . Select a CSV file to import : Select CSV file from your system.
3 . ISO 8859-1 encoded file? : If you want to encode the CSV file select it as Yes.
4 . File Separator : The value of separator which you used to separate column in CSV file is set to be here.
5 . Multi Value Separator : The value of separator which you used to separate multi value in CSV file is set to be here.
6 . Lines to skip: Enter the number of lines which you want to skip from top of the CSV files.
After Clicking on Validate data a CSV view is render if the CSV have errors then it will be shown in this correct them and upload the CSV again by clicking on Upload Again
button.
If all will be Ok then seller would able to import a CSV by clicking on Import CSV button.
CSV Export
1 . Select Categories to export : Select the categories of the product for which you want to export the products.
2 . Select Product Status : You can also export products by their status.
Points for CSV Import
1. By using this option you can only import the CSV for products and their combinations.
2. Before importing any CSV file kindly download sample file(s) for reference.
3. You have to strictly follow the CSV format as in sample files(s) no other format will be accepted.
4. You Can not use `:` as file separator or multivalue separator in CSV files.
5. For adding a new product you have to set the value of Id field in CSV file to be zero i.e 0 .
6. For updating any product provide the id of the product in the Id field in CSV file.
7. You have to provide the id of Categories in CSV which you can come to know by download the Category file by clicking on `Download Category` button which is available on top of the import form .
8. You can also set features of product by providing feature name and its value (e.g Compositions:Cotton). You can provide multiple features separated by comma or any other multivalue separator. Please make sure that you have to add one feature for a product. You can also get the available features on store by clicking on `Download Features` button.
Note: We match features name and its value by matching the string in case insensitive form so make sure that no two features can have the same name.
9. You can also come to know the available combination on store by clicking on `Download Combination` button after selecting entity `Combinations` in import form.
10. You can set combinations for product by providing attribute name and its value (e.g Color:Blue). You can also provide multiple attributes for one combination separated by comma or any other multivalue separator. Please make sure that you have to add one attribute for a combination.
Note: We match attribute name and its value by matching the string in case insensitive form so make sure that no two attributes can have the same name.
11. There is also a sample data for csv files which can be download by clicking on button provided below in the form.
Points for CSV Export
1. As if you want to update products in bulk. You can do it in a simple way.
2. Simple export the products which you want to edit. Edit them and import it back.
3. You can Export your products in CSV format by choosing particular Category.
4. You can also Export your products on the basis of their status.
